Skip to content
🔧 Free Shipping on Orders Over $50 — Shop Now

User Manual

Gel Ink Pen

Everything you need to know to protect your floors during your next project. Follow these simple steps for best results.

How to Use XFasten Plastic Razor Blade Scraper

INSTRUCTIONS


Assembling the Scraper

  1. Align the Blade with the Handle Slot. Begin by holding the handle of the XFasten Plastic Razor Blade Scraper firmly. Take the blade and carefully align it with the slot in the handle. Make sure that the blade's edges match the handle's guides for a proper fit.
  2. Slide the Blade into the Slot. With the blade properly aligned, gently slide it into the handle slot. Apply steady pressure until the blade is fully inserted. You will hear a distinct 'click' sound when the blade is correctly positioned and locked into place.
  3. Ensure the Blade is Securely Attached. After inserting the blade, double-check that it is securely attached by giving it a slight tug. The blade should remain firmly in place without any movement.

Blade Replacement

  1. Bend the Blade Slightly. When it's time to replace the blade, hold the handle of the scraper firmly. Carefully bend the blade slightly to loosen it from the handle slot. Be cautious not to apply excessive force to avoid damaging the handle or the blade.
  2. Pull Out the Blade. Once the blade is loosened, gently pull it out of the handle slot. Dispose of the used blade safely, following proper disposal guidelines.
  3. Insert a New Blade. Take a new blade and align it with the handle slot. Slide the new blade into the slot, applying steady pressure until it clicks into place. Ensure the new blade is securely attached by giving it a slight tug to confirm it is properly locked in.

Blog Feature

Other Uses of Blue Painters Tape

Blue Painters Tape are single-side adhesives specifically made to ease the jobs of professional painters and help non-professional and DIY crafters achieve a professional look on their painting jobs.

Read Now

Pro-Tips for Best Results

Grid large rugs.

Tape the perimeter first, then cross the center in a grid to stop bunching in bigger carpets.

Reinforce the trouble spots.

Add extra strips at corners and high-traffic paths — the first places a rug lifts.

Press from the center out.

Pushing outward from the middle clears air pockets and uneven spots as you go.

Let pressure do the work.

Firm, even pressure — by hand, with a book, or with a roller — is what turns a placed strip into a lasting bond.

Cut clean.

Straight cuts from scissors or a utility knife make the liner easier to peel and the final placement easier to line up.

Match tape to floor type.

Reserve this tape for sealed hard floors; skip it on unfinished wood or soft flooring where the bond will not hold as intended.

Safety Guidelines

Ensure the floor is dry

Applying film over a damp or wet floor can trap moisture underneath and create a slip hazard. Confirm the surface is fully dry first.

Mind foot traffic during application

Keep the work area clear of foot traffic while applying the film to avoid slips on the partially-adhered surface.

Storage & Handling

Store rolls flat and dry

Keep unused rolls in a cool, dry place, laid flat, to prevent the adhesive from degrading before your next project.

Stay in the Fix.

Sign up for tips, project ideas, and exclusive offers. Get 10% off your first order.