- The Foam Mounting Squares will hold out up to a maximum of 0.5 pounds in mass per squares that is to be applied. To be sure, just install the maximum allowable amount of squares that you could on the object's surface.
- For an easy installation, apply the squares first and stick it to the preferred surface before peeling off the adhesive backing. Make sure to apply pressure or press the squares firmly on all of its areas during application to ensure maximum contact and greater initial bonding.
- After peeling the adhesive liner, make sure not to touch the adhesive side as oils from your hands, or any other foreign materials can contaminate the adhesive and affect its bonding strength.
- Let the tape set for about 2-3 hours before putting some weight on the object.
For any questions, comments, and suggestions, Contact Us.