Skip to content

Tips & Instructions For XFasten Anti Slip Tape

  1. Clean the surface where you will install the Anti-Slip Tape. Lint, dirt, and dust can significantly lessen the bonding strength of adhesives. You can clean it with alcohol or soap solution. 
  2. Peel the tape from the roll. Cut the desired length of the strip based on the desired area. 
  3. Apply the tape to the surface. 
  4. Squeegee any air bubbles or gaps that may exist between the surface to weaken over time. You can use a roller, wine bottle, rubber hammer, or cylindrical canister to squeeze any excess air. 
  5. Apply further pressure on the tape. This will increase the bonding strength.
  6. Apply more strips by repeating steps 2-5.